An easy to use gauge that quickly and accurately locates/orientates reinforcement bars in concrete and measures the depth of cover over the rebar.

Designed to meet IP65 this rugged waterproof gauge can be used in the harshest of environments.

User Friendly

• Easy to transport and store
• Ergonomically shaped case for comfort
• Single handed operation: All functions can be accessed & controlled through 4 simple keys/buttons

Accurate

• Locate and determine orientation of rebar quickly, easily & accurately
• Stores up to 10 batches of 1,000 cover or half-cell readings
• Memory and data logging with data output to PC or direct to printer*
• Graph Plotting allows an immediate visual indication of results

Reliable

• Battery packs can be charged in the unit or externally. Additional batteries allow continued use

Tough

• Specifically designed for use on-site
• Rugged, waterproof IP65 case provides protection against the elements
• Backlit screen for viewing in dark environments

Efficient

• Rebar locator, concrete covermeter and half-cell measurement all available in a single gauge - (with accessories)
• Intuitive menus enable each gauge to be used straight from the box

Powerful

• Links to Covermaster™ software
• Ultimate data management tool to store cover & half cell readings and produce professional reports
• On Screen graphic display provides visual assessment of readings allowing identification of areas of low concrete cover or potential areas of corrosion

Search Heads and Half-Cell Probes are not included as standard and must be ordered separately

Not all screen shots may apply to this model

Cover Display Screen

Alternative / Typical Data Review Screen View

Backlit screens for use in dark conditions

Easy to use menus, in multiple languages to enable access to all data needed whilst on site without constant reference to the instruction book

Alternative view shows the typical display when using the deep cover search head

Bar size and depth of cover can be manually inputted to suit specific requirements

Typical data review screen clearly displays where readings are below or above a user specified tolerance, where a reading has not been taken

Units of measurement can be displayed in mm or inches for cover, or mV for Half-Cell

Half-Cell Mode

Typical Screen View

Can read both Cover and Half-Cell Values

Data logging information displayed on screen

Menu soft keys are visible

Autosizing and Orthogonal Function

Autosizing automatically estimates the size of rebar and the depth of cover

If this estimated figure differs greatly from your expected rebar size or you do not know the expected rebar size, the orthogonal size function provides an accurate measurement of bar size

The step by step directions for orthogonal function on the covermeter make the accurate sizing of bars quick and easy

Data Logging Feature

Simple Data Management on the Elcometer 331 Models SH, TH and THD

The Elcometer 331 Model SH can store up to 10 batches of 1,000 cover or half-cell readings, with batch statistics, ready for evaluation and report generation using Covermaster™ software package

Powerful Statistics Feature

Continually calculates and displays the statistical analysis of readings as they are taken. So, while the covermeter is in use, you are always informed and know exactly how your site survey is progressing

Statistics values are also calculated for the readings within each batch and these values are stored in the batch along with all individual readings

Features

• Covermeter /rebar location
• Half-Cell measurement
• Rebar orientation
• Depth of cover
• Large cover (thickness) reading mm or inches
• Large graphics display with backlight
• Multiple language menu structure
• Signal strength bar
• Interchangeable heads with LED & keypad
• User selectable bar range sizes & numbers
• Rugged waterproof case (IP65)
• Adjustable beep volume & earphone socket

Measurement sound modes

• Locate (tone increases as head approaches rebar)
• Under Cover (tone only sound for low cover
• Maxpip (tone only as head passes rebar centre)

• Large half cell reading mV
• Automatic bar size estimate
• Orthogonal bar size calculation
• RS232 Output - direct to printer or PC
• Covermaster™ software
• Statistics
• Minimum & maximum cover limits
• Date & Time

Memory

• Linear batch memory - 10 linear batches of 1,000 readings each#

Specification

Elcometer Covermeter and Half-Cell Meter Model SH

Power supply	7.4V battery pack provides up to 32 hours of continuous use (20 hrs if backlight is on). Rechargeable in 4 hours either inside or outside the gauge using an external charger
Operating temperature	0 to 50°C (32 to 120°F)
Dimensions	230 x 130 x 125mm (9 x 5.1 x 4.9")
Weight	1.54kg (3.4lbs)
Packing List	Concrete Covermeter with Half-Cell & search head connecting cable. Rechargeable battery pack & charger (UK, US & EU), earphone, shoulder strap, plastic carry case & operating instructions. Covermaster™ software and PC cable.

Search Heads and Half-Cell Probes are not included as standard and must be ordered separately