Pundit PL-200 Pulse Echo Transducer

Pundit PL-200 Pulse Echo Transducer

Pundit PL-200 Pulse Echo Transducer
Ultrasonic pulse velocity (UPV) test instrument to examine the quality of concrete to EN12504-4, ASTM C 597-02, BS 1881 Part 203, ISO1920-7:2004


CodeCN672
British StandardBS 1881 Part 203
Other StandardsEN12504-4, ASTM C 597-02, ISO1920-7:2004
Tariff90248090
Click to save page as PDF Save Page to PDF
or
Call Impact +44 (0)1294 602626

Ultrasonic pulse velocity (UPV) test instrument to examine the quality of concrete and other materials such as rock, wood and ceramics.
It provides an extended range of measurement modes and superior features for on-site testing: Assess the concrete uniformity using standard A-Scans, Line Scans and the new Area Scan functionality, estimate the compressive strength of concrete or measure the surface velocity and the depth of perpendicular cracks. The Data Logging measurement mode allows the automation of long term measurements.
The intelligent software supports directly accessible settings in real time from the measuring screen. The highest resolution and sharpest image available in the market allows best possible analysis of the measured waveforms.

Features

  • Line scans for concrete uniformity assessment
  • Zoom and scroll for precise A-Scan inspection
  • Area Scan Mode extends the possibilities for uniformity testing of larger structures
  • Data logging allows the automation of long term measurements
  • E-Modulus measuring mode to determine the Poisson's Ratio of materials
  • On board storage and review of waveforms
  • Settings directly accessible on measuring screen
  • Dual cursor for manual A-Scan evaluation
  • Separate cursor to measure signal amplitude
  • Improved surface velocity measurement
  • Automatic and manual triggering and user adjustable trigger threshold
  • A-Scan update rate up to 25 Hz

Applications

  • Through Transmission: Access from two sides
  • Assessment of Concrete Quality
  • Ultrasonic Pulse Velocity
  • Uniformity
  • Compressive strength and SONREB
  • Determination of crack depth
  • Modulus of elasticity
  • Scan Modes
  • A-Scans
  • Line Scans
  • E-Modulus
  • Data Logging
  • Area Scan

Comprehensive Measurement Modes

Line Scans
Assesses the concrete uniformity and detects cracks as well as other defects. The measured pulse velocities are
displayed as a line.
Pulse Velocity
Calculates the pulse velocity of the material under test.
Compressive Strength
Determines the compressive strength using Ultrasonic Pulse Velocity correlation, or by using SONREB.
Crack Depth
Determines the depth of perpendicular cracks according to BS 1881.
Surface Velocity
Determines surface velocity according to BS 1881.
Transmission Time
Measures the transmission time.
Distance
Calculates the distance between the transducers.

Additional Measurement Modes

E-Modulus
Determine the dynamic E-Modulus of a material (e.g. concrete or rock) by measuring P- and S-wave pulse velocties.
  • Direct calculation of the E-Modulus on the instrument
  • Measure P- and S-wave velocities on the same screen (Dual Cursor)
  • Poisson’s Ratio also calculated on PL-Link software
Data Logging
Set up automated test sequences for long term measuring applications.
  • Countdown timer indicates time to next measurement
  • Pulse velocity development shown graphically on screen
Area Scan
2D-visualization for uniformity testing on structural elements.
  • User definable colour classification based on pulse velocity or transmission time
  • User definable grid pattern for small to large scale measurements
  • All measurements can be edited (deleted, re-measured)

Specification

Range 0.1 – 7930 μs
Resolution 0.1 μs (< 793 μs), 1 μs (> 793 μs)
Display 7” colour display 800x480 pixels
Pulse Voltage UPV 100 – 450 Vpp
Bandwidth 20 – 500 kHz
Receiver Gain 1x – 10’000x (0 – 80dB) [11 steps]
Memory Internal 8 GB Flash memory
Regional Settings Metric and imperial units and multi-language supported
Battery Lithium Polymer, 3.6 V, 14.0 Ah
Battery Lifetime > 8h (in standard operating mode)
Operating Temperature 0°C – 30°C (Charging, running instrument)
0°C – 40°C (Charging, instrument is off)
-10°C – 50°C (Non-charging)
Humidity < 95 % RH, non condensing
IP Classification IP54