This is a high accuracy column load/force cell designed for use as Reference Standard or in high
capacity weighing applications where accuracy is of utmost importance.
The simple column design and sealed construction assures excellent resistance in the most arduous of conditions.
| CHARACTERISTICS |
CT050 - CT060 |
UNITS |
|
Rated Output: |
2.0 nominal |
mV/V |
|
Total Error: |
0.1 |
±% of Rated Output |
|
Zero Return: |
0.04 |
±% of Applied Load |
|
Zero Balance: |
2 |
±% of Rated Output |
|
Temperature Range: Operating |
-20°C to +70°C |
°C |
|
Compensated |
+10°C to +50°C |
°C |
|
Temperature Effect: On Output |
0.005 |
% of Applied Load/ °C |
|
On Zero |
0.005 |
% of Applied Load/ °C |
|
Safe Overload: |
150 |
% of Rated Capacity |
|
Ultimate Overload: |
300 |
% of Rated Capacity |
|
Excitation: Recommended |
10 |
|
|
Maximum |
15 |
Volts AC or DC |
|
Bridge Resistance: |
1400 |
Ohms |
|
Insulation Impedance: |
>500 |
Megaohms @ 500vdc |
|
Deflection at Rated Capacity: |
<0.4 |
mm |
|
Construction: |
Stainless Steel |
|
|
Environmental Protection: |
IP65 (IP68 available) |
|
|
Electrical Connection: |
6-Pin Bayonet-Lock Connector inc. Mating Half fitted with 4m PUR cable |
|
Dimensions
CT050: 300mm high x 127mm diameter
CT060: 325mm high x 145mm diameter
Readout Unit
High resolution digital load cell indicator designed to work with all types of load cell and strain gauge based transducer.
The load cell indicator features a 7-digit LCD display which makes it suitable for any monitoring application from general industrial up to high accuracy reference standards. Other features include peak & trough capture, display update rates up to 25Hz, display hold / freeze, shunt calibration, integrated TEDS (Transducer Electronic Data Sheet) functionality and optionally an RS232 serial data output.
The load cell indicator's dual range facility allows for calibration in two different engineering units, i.e. Newtons and kg. Alternatively, it is possible to calibrate of two separate load cells or sensor with a single display.
The load cell indicator is housed in a robust IP65 enclosure and powered by 2x 'AA' batteries that provide up to 450 hours of continuous operation in low power mode with a 350Ω load cell or strain gauge bridge connected.
