Hook Gauge Evaporimeter

Hook Gauge Evaporimeter

Hook Gauge Evaporimeter
Hook gauge used with MT016 pan, MT017 thermometer and MT018 still well
CodeMT015
Approx. Weight (kg)2
Tariff901580 93 0
Click to save page as PDF Save Page to PDF
or
Call Impact +44 (0)1294 602626

The Hook gauge evaporimeter measures the rate of evaporation by the change in level from a free water surface in a pan or tank. It is used by meteorologists and water engineers throughout the world, especially in hot, arid countries where water conservation is of vital importance.
The water level in a ‘Class A’ pan is measured, usually every 24 hours, by adjusting the height of the hook until its point just breaks the surface. The measurement is carried out inside a ‘still well’ which provides a small area of water surface free from ripples. The still well, made of brass, stands on three levelling screws and has an opening in the base to equalise water levels inside and out. The hook gauge, also brass, rests on top of the well supported by three horizontal arms and has a micrometer head to permit very fine adjustment.

  • Range of adjustment: 100mm
  • Resolution: 0.2mm
  • Weight: 2kg
  • Dimensions: 120mm x 120mm x 200mm