25kN Submersible Load Cell

25kN Submersible Load Cell

25kN Submersible Load Cell
25kN Capacity
BS1377-8
CodeSL744
Approx. Weight (kg)1
Tariff90248090
Click to save page as PDFSave Page to PDF
or
Call Impact +44 (0)1294 602626

Strain Gauge Based Submersible Triaxial Load Cell
  • Fully submersible to an external pressure of up to 70bar
  • Pressure Compensated Design
  • Robust Construction
  • Simple Installation
  • High Performance
  • High Side load Tolerance

This series of submersible triaxial load cells has been designed for measuring compressive loads from 1kN to 50kN. The products can be fitted into new or existing triaxial cells with a diameter up to100mm.
The design features an internal pressure compensation system that eliminates zero offset changes when the load cell is subjected to external pressure changes. Being insensitive to cell confining pressure, the load cell can be used inside the triaxial cell.

As the load is measured within the cell it eliminates the effects of piston friction.

The use of specially selected heat treated stainless steel and precision strain gauges ensure optimum performance and excellent long term stability.

Specification:

Rated Capacities: 1, 3, 5, 10, 25, 50 kN
Rated Output: 2.0 nominal mV/V
Non-linearity: <0.05 ±% of Full Scale
Hysteresis: <0.1 ±% of Full Scale
Temperature Range: Operating -20 to +80 °C
Compensated 0 to 50 °C
Temperature Effect: On Output <0.01 ±% of FSO/ °C
On Zero <0.02 ±% of FSO/ °C
Safe Overload: 150 % of Rated Capacity
Ultimate Overload: 300 % of Rated Capacity
Excitation: Recommended 10 Volts AC or DC
Maximum 15 Volts AC or DC
Input Impedance: 260 nominal Ohms
Output Impedance: 240 nominal Ohms
Insulation Impedance: >2000 (bridge to ground) & >1000 (shield to ground) Megaohms
Deflection at Rated Capacity: <0.05 mm
Weight: 0.85 kg
Construction: Stainless Steel
Environmental Protection: Fully submersible to 7000kPa
Cable: 3 Metre 4 Core Screened

Dimensions in mm