Automatic Concrete Water Permeability Apparatus

Automatic Concrete Water Permeability Apparatus

Automatic Concrete Water Permeability Apparatus
complete with 4 cells
CodeCN790
Approx. Weight (kg)240
Tariff90248090
Click to save page as PDFSave Page to PDF
or
Call Impact +44 (0)1294 602626

Sealing Devices must be ordered separately, see below.
This fully automatic apparatus is designed to carry out water permeability tests on concrete cube specimens up to 150mm and cylinder specimens up to 160mm diameter. The specimens are submitted to hydrostatic stress for a pre-set period. The water permeated through the test specimen is directly collected and measured into a graduated cylinder. It is therefore possible to determine the permeability coefficient in cm/sec. (Darcy coefficient) by the following formula: Formula The equipment consists of a strong metallic frame holding four cells which are hot-galvanized for anti-corrosion protection. Each cell includes a pressure control manometer. A re-chargeable compensation plenum chamber is included as part of the test.

The pressure is adjustable from 0 to 30 bar. Pressure is supplied by an automatic pump of variable supply, to achieve the most suitable installation for the specimen under test. Water feed is direct from water inlet. Seal pressure is obtained through special and practical seal devices, which maintain and simplify the use of the machine. It is possible to use one or more cells together. The specimen’s sealing system is achieved through a practical and speedy, user-friendly device.

Supplied complete with
  • Four cells
  • Four graduated cylinders
  • Epoxy resin and accessories

Sealing Devices

  • CN790/1 Sealing Device for 100mm Cubes
  • CN790/2 Sealing Device for 150mm Cubes
  • CN790/3 Sealing Device for 200mm Cubes
  • CN790/4 Sealing Device for 100mm Cylinders
  • CN790/5 Sealing Device for 150mm Cylinders
  • CN790/6 Sealing Device for 160mm Cylinders
  • CN790/7 Sealing Device for 300mm Cylinders
  • CN790/8 Epoxy Resin 5kg

Power supply: 220-240V 50Hz 1ph
Dimensions: 2500 x 500 x 1300mm
Weight: 240kg

Click Click to view a PDF file of the User Guide

A user guide is available to download from the Impact web site www.impact-test.co.uk